How To Enable Gaming Mode on Android 12

Back in Februry, folks at XDA had spotted an unreleased Gaming Dashboard in the works for Android 12. But up until now, there were no clear...

Saturday

Fix: Windows cannot access Readyshare [Full guide]

Posted by   on

How can I fix the Windows cannot access Readyshare error?


1. Check your router’s USB flash drive compatibility



Netgear Readyshare page windows cannot access readyshare


First, note that not all USB storage drives will necessarily work with NETGEAR Readyshare. Check if your USB drive has been tested to work with NETGEAR routers on the NETGEAR Readyshare page.


There you can select routers to see what drives are confirmed to work with them.


If your USB flash drive might not be compatible, try utilizing a different one with the router. Ideally, it’s best to utilize one of the USB sticks listed to work with your NETGEAR router.


2. Adjust IP and DNS settings



  1. Press the Type here to search button on your Windows 10 taskbar.

  2. Enter network in the search box to find View network connections.

  3. Click View network connections to open that applet. 

  4. Right-click your net connection and select Properties.

  5. Double-click Internet Protocol Version 4 to open the window shown directly below.

  6. Select the Obtain an IP address automatically option.

  7. Then select the Obtain DNS server address automatically radio button.

  8. Press the OK option.


After changing your network settings, check if Windows still cannot access Readyshare.


3. Turn on network discovery



  1. First, press the Windows key and S keyboard shortcut.

  2. Input the keyword Control Panel within the search text box.

  3. Click Control Panel to open it.

  4. Click the Network and Sharing Center Control Panel applet.

  5. Then click Changed advanced sharing settings on the left of the Network and Sharing applet.

  6. Select the Turn on network discovery radio button.

  7. Don’t forget to press the Save changes button.


According to some users, enabling Network discovery should help if Windows cannot access Readyshare, so be sure to try that.


4. Select the Enable insecure guest logins policy



  1. Press Windows Key + R.

  2. Next, type in the following Run command in the Open box: gpedit.msc

  3. Then click OK to open Group Policy Editor.

  4. Click Computer Configuration and go to Administrative Templates on the left of Group Policy Editor.

  5. Then select the Network and choose Lanman Workstation to open Lanman Workstation policies.

  6. Double-click Enable insecure guest logons.

  7. Select the Enabled radio button.

  8. Press the Apply button to save the new policy setting.

  9. Click OK to close the Enable insecure guest logon policy window.



Note icon

Note: Local Group Policy Editor is not available in Windows 10 Home edition. So, many users will need to edit the registry as outlined within the next resolution to enable insecure guest logins.



5. Edit the registry



  1. First, open Run with the Windows + R hotkey for that accessory.

  2. Type in this Registry Editor command and click OK: regedit

  3. Next, navigate to this registry key path: Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters

  4. Select the Parameters key.

  5. If you can’t find a AllowInsecureGuestAuth DWORD there, right-click within the right side of the Registry Editor window and select New and choose DWORD. Then enter AllowInsecureGuestAuth as the DWORD title.

  6. Double-click AllowInsecureGuestAuth to open the window in the snapshot directly below.
    Edit DWORD window windows cannot access readyshare

  7. Then delete the 0 in the Value data box. Enter 1 in that box to replace the deleted value.

  8. Press the OK button to exit the Edit DWORD window.


Once you make these changes, check if Windows still cannot access Readyshare.


6. Make sure SMB 1.0 is enabled



  1. Open Windows 10’s search tool.

  2. Enter the keyword Windows features within the search box. Select Turn Windows features on or off.

  3. Click Turn Windows features on or off within the search results to open the window in the snapshot below.
    Windows Features window windows cannot access readyshare

  4. Double-click the SMB 1.0 checkbox to expand it.

  5. Then click SMB 1.0/CIFS File Sharing Support to select all the SMB 1.0 checkboxes.

  6. Select the OK option.

  7. Thereafter, click the Restart now button.


Those are resolutions users have confirmed to fix the Windows cannot access Readyshare error. So, the above resolutions will probably fix NETGEAR Readyshare USB drives so they become accessible in Windows 10.


Did you find a different solution? If so, feel free to share it with us in the comments section.





idee restoro Still having issues? Fix them with this tool:


  1. Download this PC Repair Tool rated Great on TrustPilot.com (download starts on this page).

  2. Click Start Scan to find Windows issues that could be causing PC problems.

  3. Click Repair All to fix issues with Patented Technologies (Exclusive Discount for our readers).


Restoro has been downloaded by 0 readers this month.


No comments:
Write Comments

Hello Friends, welcome to autobloginc.blogspot.com we Hope You'll like it - COntact US
!!THANK YOU FOR YOUR SUPPORT!!