How To Enable Gaming Mode on Android 12

Back in Februry, folks at XDA had spotted an unreleased Gaming Dashboard in the works for Android 12. But up until now, there were no clear...



Posted by   on

To enter Safe Mode, do the following:

  1. Restart your PC while Windows 10 boots. You might have to restart your PC couple of times before you can start Automatic Repair mode.

  2. Select Troubleshoot > Advanced options > Startup Settings and click the Restart button.

  3. After your computer restarts, you should see a list of options available. Select Safe Mode with Networking by pressing 5 or F5 on your keyboard.

  4. When you enter Safe Mode try to update your drivers again.

Don’t forget that even from safe mode, there is a big probability that you can find an older driver or a version that may not be compatible. In this case, we recommend you let a dedicated tool do the job for you.

Not only it will keep you away from downloading the wrong driver, but it will also let you choose what drivers you want to install for each of your PC’s components. You are the only entity that will decide and install a driver as the program will only find the right one and give you the option to install it or not.

Get DriverFix

Solution 3 – Upgrade your BIOS and enable Virtualization Technology

Few users reported MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED BSoD error, and according to them, the issue was fixed after downloading the latest version of BIOS.

Updating BIOS is a relatively advanced procedure, therefore you should be extra careful while performing it if you wish to avoid causing any permanent damage.

It’s worth mentioning that BIOS update process is different for each motherboard model.

So in order to see how to properly update BIOS, be sure to check your motherboard manual for detailed instructions.

As for the required files, you should be able to find the latest BIOS available from your motherboard manufacturer’s website.

In addition to updating BIOS, many users are suggesting to enable Virtualization Technology.

Not all processors support Virtualization Technology, so before you try to enable it, be sure that your processor supports it.

As for enabling Virtualization Technology, you’ll need to enable it from BIOS. For detailed instructions on how to enter BIOS, be sure to check your motherboard manual.

Solution 4 – Downgrade BIOS

Although updating BIOS enables new features, some users claim that MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED BSoD error was fixed after they installed an older version of BIOS.

It’s worth mentioning that after downgrading BIOS users reported slightly lower CPU speed and the inability to change the multiplier in BIOS.

Despite these drawbacks, the issue with BSOD was fixed after a successful BIOS downgrade.

Solution 5 – Disable CPUID Value Limit

Many users reported MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED BSoD error while installing Windows 10, and you can easily fix this error by disabling CPUID Value Limit setting in BIOS.

Before you can disable this setting, make sure that your BIOS has this option available.

To see how to locate and disable CPUID Value Limit in BIOS make sure to check your motherboard manual.

In addition to the CPUID Value Limit, some users are also recommending to disable Hyperthreading and Multiple CPU cores in BIOS.

If the BSoD error is resolved, you can try enabling these features one by one if you need to use them.

Solution 6 – Make sure you’re using identical CPUs

This solution applies only to users that have two CPUs on their motherboard. If you have just one processor, you may skip this solution.

If you’re using two processors and you’re getting MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED BSoD error, you need to make sure that installed processors are identical.

This includes both model and stepping, and if processors aren’t identical, you might have to replace one of them.

Solution 7 – Check for hardware problems

Sometimes MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED error is caused by faulty hardware, most commonly processor, so you might need to check it.

Several users reported that they have successfully fixed this BSoD error by replacing their CPU, so make sure that you try that.

Solution 8 – Run an SFC Scan

System File Checker will help you find and fix problems and errors like MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED.

Below you will find a guide on how to run an SFC scan on your Windows 10 laptop or PC:

  1. Click the Start (Windows) button on your keyboard or open it by clicking on it in the left-bottom corner of your desktop

  2. Type command in the search box (Wait for results to appear, do not hit Enter key yet)

  3. In the results, Command Prompt will appear. Right-click on it and select Run it as Administrator

  4. In the command line in Command Prompt type sfc /scannow

  5. After the scan is over, follow the on-screen commands, restart your PC and see if the problems still persist.

MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED BSoD error can be problematic since it’s usually related to your CPU or BIOS, but you can easily fix it by using one of our solutions.

  • What is multiprocessor configuration?

No comments:
Write Comments

Hello Friends, welcome to we Hope You'll like it - COntact US