How To Enable Gaming Mode on Android 12

Back in Februry, folks at XDA had spotted an unreleased Gaming Dashboard in the works for Android 12. But up until now, there were no clear...


Fix: UNetbootin not working Windows 10 [Failed to start]

Posted by   on

The full error reads Windows failed to start A recent hardware or software change might be the cause. Unfortunately, the error message does not give much to work with.

This error is usually triggered if the Live USB was not created properly, and in this guide we’ll show you how to fix this issue.

How do I fix UNetbootin if it’s not working in Windows 10?

1. Change BIOS Setup 

  1. Press the Windows key + I to open Settings.

  2. Go to Update & Security.

  3. Open the Recovery tab from the left pane.
    Windows failed to start. A recent hardware or software change might be the cause

  4. Scroll down to Advanced startup and click the Restart Now button.

  5. Click the Restart Now button.

  6. After the Restart, select the Troubleshoot option.

  7. Under Advanced options, choose UEFI firmware settings.
    Windows failed to start. A recent hardware or software change might be the cause

  8. Confirm the restart. This will allow you to enter BIOS on your Windows 10 PC.

  9. After entering the BIOS, open the Boot tab.

  10.  Set UEFI/BIOS Boot Mode to Legacy.

  11. Save the changes and exit BIOS.

Restart your PC and try to boot with the live USB. Check if the UNetbootin not working in Windows 10 error is resolved.

2. Disable Secure Boot 

  1. Power off your PC. Restart and then start pressing F2 to access the BIOS.

  2. In the BIOS, open the Security tab.

  3. Highlight and choose Default Secure boot on and set it as Disabled.

  4. Save the changes and exit BIOS.

  5. Reboot the computer with live USB connected and check if the failed to start UNetbootin error is resolved.

If the error persists, disable Fast startup in Windows 10. Fast Startup is a feature designed to reduce boot time. However, it prevents the computer from completely shutting down, which can lead to compatibility issues.

3. Disable Fast Startup

  1. Press the Windows key and type cmd.

  2. Now select Run as administrator.

  3. In the Command Prompt window, type the following command and hit Enter:
    Powercfg -h off

  4. This will turn off Fast Startup. Reboot the computer and check for any improvements.

4. Create a new Live USB 

One of the common reasons for Windows failing to start – A recent hardware or software change might be the cause is a corrupted Live USB drive created using UNetbootin.

Run a System Scan to discover potential errors

Restoro Scan

Click Start Scan to find Windows issues.

Restoro Fix

Click Repair All to fix issues with Patented Technologies.

Run a PC Scan with Restoro Repair Tool to find errors causing security problems and slowdowns. After the scan is complete, the repair process will replace damaged files with fresh Windows files and components.

To make sure the Live USB was created properly, create a new bootable drive using the existing ISO file. This would eliminate any chances of error that may have triggered due to missing or corrupt files in the drive.

5. Check ISO files for error

If the UNetbootin is still not working after creating a new live USB, check your ISO image for errors. Incomplete download or corrupted files may cause the installation to file.

Download the latest version of the ISO image available from the official source. Then create a new bootable drive and check for any improvements.

Alternatively, try using boot repair software. If you are experiencing an error on an existing installation, boot repair tools can fix computer booting issues and repair corrupted files.

6. Create bootable drive with Rufus 

  1. Download Rufus from the official website.

  2. Make sure you have the latest ISO installed, and the USB is connected to your PC.

  3. Launch the Rufus application.

  4. Select your flash drive under the device.

  5. Next, choose your ISO, partition scheme, and target system as BIOS or UEFI.

  6. Choose the Format option and leave the other options as default.

  7. Click Start to create a bootable drive.

Rufus is a popular utility to create bootable USB flash drives. If UNetbootin is not working, Rufus is an excellent alternative with a uncomplicated interface.

1 comment:
Write Comments
  1. Ok thanks for sharing this type of information about it, you can also check out roblox hack download it will be helpful for you. Although it's other version are also really awesome. You can choose them.


Hello Friends, welcome to we Hope You'll like it - COntact US